Class 10 Maths Notes Chapter 9 — Some Applications of Trigonometry#

Key terms#

  • Line of sight — the line from the observer’s eye to the point on the object being viewed.
  • Horizontal — the line through the observer’s eye, parallel to the ground.
  • Angle of elevation — the angle between the line of sight and the horizontal when the object is above eye level (you raise your head).
  • Angle of depression — the angle between the line of sight and the horizontal when the object is below eye level (you lower your head).

The angle of depression from A to B equals the angle of elevation from B to A. They are alternate angles, because both horizontals are parallel.

Solving heights and distances#

  1. Draw a neat figure and mark the right angle, the known lengths and the angles.
  2. Pick the right triangle that contains the unknown and one known side.
  3. Choose the ratio that links them. $\tan\theta$ is used most, because it links height and horizontal distance: $$\tan\theta = \frac{\text{height}}{\text{horizontal distance}}$$ Use $\sin\theta$ or $\cos\theta$ when the slant length (rope, ladder, string, line of sight) is involved.
  4. Substitute the standard value and solve.
$30°$ $45°$ $60°$
$\sin$ $\frac{1}{2}$ $\frac{1}{\sqrt{2}}$ $\frac{\sqrt{3}}{2}$
$\cos$ $\frac{\sqrt{3}}{2}$ $\frac{1}{\sqrt{2}}$ $\frac{1}{2}$
$\tan$ $\frac{1}{\sqrt{3}}$ $1$ $\sqrt{3}$

Common set-ups#

  • Two angles from two points on the same line (object moves, or observer walks): write $\tan$ for each triangle, form two equations, and subtract or substitute.
  • Observer’s height: subtract the eye height from the object’s height before using the ratio. A 1.5 m boy looking at a 30 m building sees a height of 28.5 m above his eyes.
  • Object on top of another (a statue on a pedestal, a tower on a building): use the bottom and the top as two separate angles from the same point.
  • Angle of 45°: height = horizontal distance, because $\tan 45° = 1$.
  • Speed and time: find the distance covered, then use time = distance ÷ speed. Often the time comes out as a simple ratio, as in “6 seconds then 3 seconds”.

Common mistakes#

  • Measuring the angle of depression from the vertical instead of the horizontal.
  • Using the full height of the object when the observer’s eye is above the ground.
  • Choosing $\sin$ when the slant length is not given or needed. Use $\tan$ for height and distance.
  • Rationalising wrongly: $\frac{30}{\sqrt{3}} = 10\sqrt{3}$, not $30\sqrt{3}$.